Movement Drum Computer

MOVEMENT · PERCUSSION COMPUTER II

HI HAT PC
CYMB PC
TOP   BOT
BEND  RND
ACC LEVEL
TEMPO
x2    INT
TAPEMIDI
M.C.S.

PLAYING IT

New here? Press Guide at the top for lessons you can watch on the machine and then try yourself.

This is an interactive replica of the drum computer built by Movement Computer Systems in Bridgwater, Somerset, in 1983. Sound starts with your first click or key press. Click the keys or type on your own keyboard. To start, press any key twice, then D, then N, then P and ENTER to play rhythm 00.

Rhythm 00, SWEET DRMS, is my reconstruction of the Eurythmics beat. Sound On Sound describes a four-on-the-floor bass drum with the low tom tuned all the way down for the big “doom” on the downbeat, so module 2’s bottom PITCH-SUS knob starts fully down and the tempo starts at 43 (126 BPM). The original step data was never published, so the exact placement of each hit is my guess. Read the machine’s history, who used it, and how close this replica is.

START-UP

POWERThe button above the machine. Switching on boots the Nascom monitor (NAS-SYS 3), which runs the drum program.
DDrums. Then N (normal start), H (high resolution start, runs the clock twice as fast) or C (continue).
VVerify a tape you saved.
EEnter Nascom BASIC (see BASIC below). ESC comes back here.
T / YTrack sheet and word processor. These were £27 firmware options and are not fitted here.

DRUMS MENU

0–9Choose a page. Each page holds 10 rhythms (00–99).
CCompose a new rhythm
PPlay or modify a stored rhythm
E / TErase a rhythm / transfer (copy) it under a new name
AAssemble rhythms into a sequence with repeats
RRun the assembly. SPACE or the RES-GO key halts and resumes it.
I / SInformation sheet / save everything on tape

COMPOSING

SET UPGive a number, a name, beats per bar (the step count) and bars. The rhythm loops, with module 7 as the metronome.
1–7Top (cymbal) voices of modules 1–7, from your keyboard
Z–MBottom (drum) voices of modules 1–7
SHIFTHold for an accent (8 also works). The ACCENT key latches it, and its LED shows when it’s on. ACC LEVEL sets how much louder accents are.
E + KEYHold E and a voice key to erase that voice as it plays
R + KEYHold R and a voice key to repeat it on every step
SPACEStop (or press RES-GO). The compose menu then offers O off-beats ×2/×4, S shuffle, D/C clear drums/cymbals, I/K metronome in/out, M multiply bars.

BASIC

HELPLists the commands. Type it and press ENTER at the Ok prompt.
PRINTPRINT 2+2 or ? "HELLO" runs straight away.
10 …A line that starts with a number is stored: 10 PRINT "HI", 20 GOTO 10. Then RUN, LIST or NEW. LET, IF…THEN, GOTO, GOSUB, FOR…NEXT and REM work too.
ESCStops a running program. At the Ok prompt it goes back to the start menu.
MONITORThe real way out: NAS-SYS, then E1000 restarts the drums (EE000 returns to BASIC).
SHIFTOn the screen keyboard, SHIFT then a key types its symbol: 2 for ", = for +, : for *.

VOICE MODULES

The panel follows a photo of a real Mk II. Each of the 7 modules on the right has a top (metallic) voice and a bottom (drum) voice. Each voice has a PITCH-SUS knob, a VOLUME knob and a REAL-SYN switch with an LED. On REAL it plays an 8-bit EPROM sample, and PITCH-SUS changes pitch by changing how fast the sample is read. On SYN it uses an analogue-style voice, and PITCH-SUS sets sustain. Between the two voices is a TOP / OFF / BOT switch marked TRIG; what it did isn’t documented, so here it only moves. The voice keys are numbered 1–14: even numbers on the top row play a module’s top voice, odd numbers on the bottom row play its bottom voice (my reading of the layout). The voices are unlabelled on the real machine, so this table is the only key.

The clock module, left of the screen, has HI HAT PC and CYMB PC knobs (pitch of the synth hi-hat and cymbal loops), TOP / BOT and BEND / RND toggles, ACC LEVEL (how much louder accents are), TEMPO, and x2 / INT toggles. The labels are from photos; what the toggles did is my guess. Here TOP / BOT switch each row of voices on and off, BEND makes sampled hits fall in pitch, RND adds small random pitch changes, x2 doubles the tempo, and switching INT off stops the clock as if waiting for an external one. The TAPE / MIDI switch under the screen belongs to the 1984 MIDI upgrade and only changes a message here. Power and volume are above the machine because the real controls aren’t on the front panel.

MODULETOP REALTOP SYNTHBOTTOM REALBOTTOM SYNTH
1Hi-hat closedHi-hat loopBass drumBass drum
2Hi-hat openHi-hat loopLow tomLow syndrum
3Bell tapCymbal loopMid tomMid syndrum
4CymbalCymbal loopHigh tomHigh syndrum
5Short cymbal tapNoise sweep downSnare shortSnare, high noise
6CowbellResonant noiseSnare longSnare, low noise
7User sample (clap)ClaveTambourineTweak